Mastercam alternatives: 11 CAM tools compared

Shops look at Mastercam alternatives when they want a price they can read before talking to a salesperson, when their parts are already designed in SOLIDWORKS or Rhino, or when the work is a narrow niche such as signs, tooling or Swiss-type turning. Options range from a free-to-use hobby programme to CAM that lives inside a CAD package.

Short answer: The first three alternatives to Mastercam in our CAM software ranking are Estlcam, Vectric VCarve and Tebis. Where a category has smaller vendors worth recommending, they occupy the first three places and the big brands come below them. Choose Estlcam if your jobs are 2D or 2.5D parts on a small router or mill and a licence key without a renewal clock appeals. The 11 entries that follow are all ranked in Best CAM Software in 2026; each one explains what sets it apart from Mastercam.

Vendors can pay for more visibility on this website, for example a higher place in a ranking or more room on a page. Commercial relationships can also affect which products we feature and how prominently. Every vendor link is marked the same, whatever the arrangement behind it. How that works.

Mastercam

#5 of 12 in our CAM software ranking

  • Pricing: Quoted via a How to Buy page; Learning Edition trial linked
  • Established in: Not stated by the vendor
  • Built for: Production machine shops that want a CAM system with claimed shorter cycle times
  • Not for: Hobbyists and small shops wanting listed prices or a free tier
01

Why buyers look past Mastercam

  1. 01

    Buying starts with a conversation

    Mastercam's How to Buy page offers a subscription, described as a term-based rental with a lower upfront cost, and a perpetual licence. It names no amounts and no reseller list; a representative helps choose the package and payment terms. Anyone who wants to compare prices on paper will find nothing to compare.

  2. 02

    Upgrades depend on a maintenance term

    With a perpetual licence the page says you can move to newer versions for the length of the Maintenance term, paired with Mastercam CONNECT. No cost or duration is published. The Copilot assistant is also tied to CONNECT, so a perpetual buyer who lets the term lapse should check what is lost.

  3. 03

    Scope is broad, so a narrow job may be over-served

    The product pages list Mill, Lathe, Mill-Turn, Swiss, Router, Wire and a separate Design product, and the page says price depends on features, machine types and licence count. A shop that only cuts signs or runs one lathe may be paying for a lineup it will not touch. The company footer names no parent and no country.

02

11 alternatives at a glance

In our order, challengers before brands
AlternativeHeadquartersFree optionPricing model Switch ifOur rank
EstlcamGermanyYesPublishedyour jobs are 2D or 2.5D parts on a small router or mill and a licence key without a renewal clock appeals#1
Vectric VCarveUnited KingdomNo free tierSee profileyou cut signs, relief carvings or furniture parts and want to start small and step up later#2
TebisGermanyNo free tierOn requestyour shop makes dies, moulds or large automotive tooling and you also want planning and measuring modules from one vendor#3
RhinoCAMUnited StatesNo free tierOn requestyour designers already model in Rhino and you would rather program toolpaths inside that window#4
BobCAD-CAMNot stated by the vendorNo free tierOn requestyou run a mixed shop, with plasma or waterjet cutting beside milling, and want one package for all of it#6
SolidCAMNot stated by the vendorNo free tierOn requestyour parts are designed in SOLIDWORKS, Inventor or Solid Edge and you want toolpaths to follow design changes#7
CAMWorksNot stated by the vendorNo free tierOn requestyou want feature recognition to propose operations and you want your shop's practice stored as reusable rules#11
hyperMILLNot stated by the vendorNo free tierOn requestfive-axis and automated machining matter, and you can accept a quote-led purchase with a maintenance contract#8
GibbsCAMNot stated by the vendorNo free tierOn requestmost of your programming is turning, mill-turn or Swiss-type work#9
CimatronNot stated by the vendorNo free tierOn requestyou build tooling, with mould, die or electrode design in the same system as the machining#10
NX CAMNot stated by the vendorNo free tierOn requestyou need multi-axis machining inside a larger Siemens product environment and want tiers priced by capability#12
03

What each one does differently

Estlcam

Germany · Published

Estlcam is run from Höpfingen in Germany and works from DXF or SVG drawings, STL files and pictures in PNG, JPG or GIF. A version 13 licence includes one year of updates from first use, after which an Update Code is needed; older releases keep running. The pages we read list no amounts, and the programmes it produces are aimed at USB-driven mills.

Switch from Mastercam if your jobs are 2D or 2.5D parts on a small router or mill and a licence key without a renewal clock appeals.

Read our review of Estlcam (position 1 of 12 on the CAM software list) →

Vectric VCarve

United Kingdom · See profile

Vectric Ltd, registered in England, sells Cut2D, VCarve and Aspire as a ladder. VCarve adds 2.5D toolpaths and 3D import over Cut2D, and Aspire adds full 3D modelling. The site says an upgrade costs only the difference, and each Windows product has a Try for Free option. Amounts are not shown on the page we read.

Switch from Mastercam if you cut signs, relief carvings or furniture parts and want to start small and step up later.

See the full Vectric VCarve entry, ranked 2 of 12 among CAM software products →

Tebis

Germany · On request

Tebis Technische Informationssysteme AG sits in Planegg near Munich and lists about 400 employees and 13 sales and service locations. Its CAM covers milling, deep-hole drilling, turning, EDM and laser processes, beside CAD, quality and MES software. The focus is die, mould and model making, automotive and aerospace. The page we read gives no prices.

Switch from Mastercam if your shop makes dies, moulds or large automotive tooling and you also want planning and measuring modules from one vendor.

Read our review of Tebis (position 3 of 12 on the CAM software list) →

RhinoCAM

United States · On request

MecSoft Corporation of Dana Point, California, ships RhinoCAM as a Windows plug-in that needs a licensed Rhinoceros, versions 7.0 or 8.0. The XPR, STD, EXP, PRO and PRE configurations each link to a shop page, and continuous 5-axis work sits in Premium. A free trial is offered from the product page.

Switch from Mastercam if your designers already model in Rhino and you would rather program toolpaths inside that window.

Our CAM software guide puts RhinoCAM at 4 of 12; read why →

BobCAD-CAM

Not stated by the vendor · On request

BobCAD-CAM, Inc. says it has been around for over 40 years with more than 150,000 users, and cites over 1,000 post processors. One system covers design, toolpaths, simulation and G-code for mills, lathes, routers, mill-turn, wire EDM, laser, plasma and waterjet. Licence types are described only as flexible, and a demo is booked through the contact page.

Switch from Mastercam if you run a mixed shop, with plasma or waterjet cutting beside milling, and want one package for all of it.

Full verdict on BobCAD-CAM, which sits at number 6 of 12 for CAM software →

SolidCAM

Not stated by the vendor · On request

SolidCAM Ltd runs inside SOLIDWORKS, Inventor and Solid Edge, so operations are defined and checked in the CAD window without file transfer. Its iMachining modules adjust feeds, speeds and step-downs automatically. A free Maker Version is limited to non-commercial use by makers and students. A free trial form exists; no prices are printed.

Switch from Mastercam if your parts are designed in SOLIDWORKS, Inventor or Solid Edge and you want toolpaths to follow design changes.

Full verdict on SolidCAM, which sits at number 7 of 12 for CAM software →

CAMWorks

Not stated by the vendor · On request

CAMWorks picks out machinable features from the CAD model, then chooses tools and builds operations from rules saved in TechDB. Modules run from 2.5-axis to Swiss, wire EDM and mill-turn, plus VoluMill for high-speed work. CAD and CAM data share one file inside SOLIDWORKS or Solid Edge. The page offers a demo or a quote, not prices.

Switch from Mastercam if you want feature recognition to propose operations and you want your shop's practice stored as reusable rules.

Check CAMWorks in the ranked list (11 out of 12, CAM software) →

hyperMILL

Not stated by the vendor · On request

OPEN MIND Technologies AG lists hyperMILL modules from drilling and 2.5D milling to 5-axis, deburring, probing, wire EDM, additive control and virtual machining. The 2026 release stresses automation and turning. The company names a TISAX label and VDW membership. Maintenance agreements appear only as a menu link, and no prices are shown on the page we read.

Switch from Mastercam if five-axis and automated machining matter, and you can accept a quote-led purchase with a maintenance contract.

Open the hyperMILL profile, 8th of 12 in the CAM software guide →

GibbsCAM

Not stated by the vendor · On request

GibbsCAM states it is part of the Sandvik group. The page centres on lathes, from simple automatic models to multi-channel turn-mill centres and sliding headstock machines, and names Citizen, DMG Mori, Index, Mazak, Okuma, Star, Tornos and Willemin among partners. A free trial form and a Student License page exist; prices are not printed.

Switch from Mastercam if most of your programming is turning, mill-turn or Swiss-type work.

Where GibbsCAM stands: place 9 of 12 in the CAM software ranking →

Cimatron

Not stated by the vendor · On request

Cimatron describes dedicated tools for mould, die and electrode design plus NC programming from 2.5-axis to 5-axis, and the footer reads Part of Sandvik group. Its lineup includes Mold Design, Die Design, Electrodes Design and DieQuote. A free trial or demo is requested by form, and the pages we read show no prices.

Switch from Mastercam if you build tooling, with mould, die or electrode design in the same system as the machining.

#10 out of 12 CAM software products: read the Cimatron review →

NX CAM

Not stated by the vendor · On request

Siemens sells NX X Manufacturing as a cloud-powered SaaS in four tiers named Essentials, Standard, Advanced and Premium. Standard covers 2.5-axis milling, hole making, turning and probing, Advanced adds 3-axis freeform work, and Premium adds multi-axis. Add-ons arrive through Value Based Licensing. A free trial is offered for part manufacturing.

Switch from Mastercam if you need multi-axis machining inside a larger Siemens product environment and want tiers priced by capability.

NX CAM review, listed at 12 of 12 CAM software products →

—

Which alternative for which situation

  1. 01

    You want a licence key you can keep without a renewal clock

    Estlcam: Version 13 licences include one year of updates from first use, older releases stay usable, and the free version has no time limit.

  2. 02

    Your parts are drawn in SOLIDWORKS, Inventor or Solid Edge

    SolidCAM: Operations are set up and checked in the CAD window, and a Maker Version covers non-commercial use.

  3. 03

    You cut signs, carvings or decorative parts

    Vectric VCarve: VCarve sits between Cut2D and Aspire, and moving up a product costs the difference.

  4. 04

    Your modelling is done in Rhino

    RhinoCAM: It runs as a Windows plug-in for Rhino 7.0 and 8.0, which must be licensed separately, and a free trial is offered.

  5. 05

    Most of your work is turning or Swiss-type machines

    GibbsCAM: The site centres on lathes, turn-mill centres and sliding headstock machines, and a trial form is on the page.

04

When Mastercam is still the right choice

Mastercam is a sensible place to remain if your shop programs several machine types and wants one system for mill, lathe, router, wire and Swiss work. Its Dynamic Motion technology, which the site says can shorten cycle times by up to 40 percent, and the Learning Edition for training new programmers are real draws. If the only complaint is the quoting process, ask for the written terms before you move.

05

What moving off Mastercam involves

  1. 01

    Toolpaths and posts will not carry over

    Operations are built in Mastercam's own format, so every part program has to be recreated in the new system. Keep the machine definitions, tool libraries and post processors you rely on, and prove each post on a scrap run before the old licence ends.

  2. 02

    Check the maintenance and subscription end dates

    A perpetual licence keeps working without maintenance, but a subscription is a term-based rental. Find out which you hold before you commit, and run both systems side by side for a few jobs so that no order depends on an untested program.

  3. 03

    Rebuild the tool library early

    Cutter data, feeds and speeds live in the CAM system. Export what you can, then reconcile the library against the tools actually on your shelf before the first live cut.

06

Questions about replacing Mastercam

6 answers
How much does Mastercam cost?

The How to Buy page and the products page show no amounts. They describe a subscription and a perpetual licence, and say pricing depends on included features, supported machine types and the number of licences. A customised quote is the route to a figure.

Is there a free version of Mastercam?

The site links a free Learning Edition, described as a trial version for demonstration, educational and home learning use. The page we read does not say it is meant for production work.

Which alternative has a free option?

Estlcam is described as fully functional and usable indefinitely, with slower opening and saving as its only restriction. SolidCAM offers a free Maker Version for non-commercial use, and Vectric, RhinoCAM and others link trials.

Which Mastercam alternative runs inside a CAD package?

SolidCAM works inside SOLIDWORKS, Inventor and Solid Edge. CAMWorks links with SOLIDWORKS and Solid Edge and stores CAD and CAM data in one file. RhinoCAM is a plug-in for Rhinoceros.

Does Mastercam cover more than milling?

Yes. Its pages list CNC Mill, Lathe, Mill-Turn, Swiss, Router and Wire, plus a Design product that is also sold alone.

Which options are best for turning?

GibbsCAM focuses on lathes, turn-mill centres and sliding headstock machines. hyperMILL lists turning solutions, and Tebis lists turning and turn-milling among its processes.

—

Sources

Checked 14 November 2026
  • Mastercam How to Buy: Subscription and perpetual licence, Maintenance term, no amounts.
  • Mastercam home: Dynamic Motion up to 40 percent, Copilot, CONNECT, CNC Software LLC footer, Learning Edition link.
  • Mastercam products: Mill, Lathe, Mill-Turn, Swiss, Router, Wire, Design, Learning Edition, price factors.
  • Estlcam: Free version, licence without expiry, one year of updates, file types, Höpfingen, Germany.
  • Vectric: Cut2D, VCarve, Aspire, pay the difference to upgrade, Try for Free, Vectric Ltd England.
  • Tebis: Planegg, 13 locations, about 400 employees, CAM scope, industries.
  • MecSoft RhinoCAM: Rhino 7.0 and 8.0 plug-in, configurations, 5-axis in Premium, free trial, Dana Point.
  • BobCAD-CAM: Over 40 years, 150,000 users, 1,000 post processors, machine types, demo by contact.
  • SolidCAM: CAD integration, iMachining, Maker Version, trial registration.
  • CAMWorks: Feature recognition, TechDB, modules, SOLIDWORKS and Solid Edge integration, demo and quote.
  • OPEN MIND hyperMILL: Module list, hyperMILL 2026, TISAX, VDW, maintenance agreements link.
  • GibbsCAM: Sandvik group, lathes and turn-mill, partners, trial form, Student License.
  • Cimatron: Mould, die and electrode tools, 2.5 to 5-axis NC, Sandvik group, trial or demo form.
  • Siemens NX X Manufacturing: Four tiers, Value Based Licensing, SaaS, free trial.
—

Who wrote this

Last reviewed 14 November 2026

Sebastiaan Smits

Founder · Amsterdam, Netherlands

Founder of The Knowledge Engineers and of 2 Steps Ahead, an AI search visibility agency. Editorially responsible for every page on this site; research and drafting are AI-assisted.

Written, edited and fact-checked by Sebastiaan Smits. Last reviewed 14 November 2026. How we review.

—

Alternatives to other products