Printed circuit board services turn a design upload into physical boards, and some also source parts and fit them. This guide ranks eleven fabricators and assemblers for buyers of prototypes or small runs.
It weighs the price visible before uploading, stated minimums, published limits, extras the calculator adds later, and how plainly each vendor names where it operates.
Vendors can pay for more visibility on this website, for example a higher place in a ranking or more room on a page. Commercial relationships can also affect which products we feature and how prominently. Every vendor link is marked the same, whatever the arrangement behind it. How that works.
In short
What PCB manufacturing services software does
A PCB manufacturing service fabricates bare circuit boards from customer design files, often sources components and assembles them too, and charges per board, per area or per quoted order.
Ranking criteria for this PCB manufacturing services tool list, applied top to bottom: effort to get started, cost in practice, data return, ability to leave, buyer fit. Challengers hold places 1 to 3 wherever the category has them. Established brands begin at place 4. Our how we work page explains the choice of these five and why we give no mark out of ten.
Per-square-inch prototype boards, made in the USA, shipped worldwide
Ranked #1 of 11 in Best PCB Manufacturing Services in 2026.
Published pricingElsewhere
Pricing follows board area, so a small design costs little and a large one climbs quickly. Listed rates rise from $5 per square inch for a 2-layer prototype to $15 for 6 layers, and 4-layer Super Swift reaches $20.
Three copies is the only stated minimum, and the page gives no size limits, so check dimensions before ordering.
What stands out
per square inch
prototype boards
made in the USA
Where it costs you
Flex boards were listed as temporarily unavailable at the time of reading.
The page uses a bare dollar sign and names no company seat, only 'OSH Park, LLC'.
Right for
Hobbyists and small teams ordering three copies of compact boards
Wrong for
Buyers needing assembly or component sourcing from the same site
Not stated by the vendorPublished per square inch by board type; minimum of three copies
Euro price grid for prototype and series boards, businesses only
Ranked #2 of 11 in Best PCB Manufacturing Services in 2026.
Published pricingElsewhere
The page lists prototype prices by layer count and turn time: 4-layer at €59,00 standard or €25,80 on the slower 'Spar' turn, 6-layer €98,00 or €93,10, and 8-layer €157,00 or €149,15.
Series boards fall to €1,22 each for 2 layers at 1,000 pieces. Optional free panel assembly and free data conversion for some file formats are offered. Prices exclude VAT, and shipping rates differ by country.
What stands out
EUR price grid
business buyers
series pricing
Where it costs you
Private makers cannot order, because the shop serves companies and public bodies alone.
The company is named 'Multi Circuit Boards Ltd.' but no registered seat appears on the pages read.
Right for
Companies wanting transparent euro prices from one-off prototypes to series
Wrong for
Private individuals and hobby builders buying a single board
Not stated by the vendorPublished in EUR excluding VAT, with shipping added per destination
American-based maker posting fixed per-board prices at the top of its site
Ranked #3 of 11 in Best PCB Manufacturing Services in 2026.
Published pricingNorth America
Listed prices are per board, not per order, which makes a one-off prototype easy to budget. Standard boards are offered from one piece up to 1000 and beyond, and assembly lists no minimum volume.
The company calls itself an 'American-Based Manufacturer' without giving a headquarters address. Registering unlocks an exclusive first-order discount, so the posted figures may not be the full story for returning buyers.
What stands out
fixed board prices
American-based
first-order discount
Where it costs you
The page shows a dollar sign without naming the currency.
The Bare Bones 2-layer option carries no price on the home page.
Right for
US-based engineers wanting a posted price per board before uploading anything
Wrong for
Buyers who need prices in euros or a European production site
United StatesPublished per board by service type; no minimum for fabrication
Boards priced online from factories in Hungary and Germany
Ranked #4 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestElsewhere
Three delivery classes are laid out by working days: PCB Proto at 3 for bare boards and 6 assembled, the STANDARD pool at 5 and 10, and the HDI pool at 12 and 17.
Design data can be uploaded for automatic set-up. PCB Proto includes lead-free finish as a product feature, but the site describes no trial and no discount. Country of registration is not stated.
What stands out
Made in Europe
pool delivery
HDI option
Where it costs you
No price figure or currency appears on the home page; you must enter board data first.
The imprint link returned a 404, so the company seat could not be confirmed.
Right for
Buyers who want stated delivery days and European factories before ordering
Wrong for
Buyers who want a price visible before entering any specification
Not stated by the vendorInstant online calculation from layers, size, quantity and lead time
Three tiers from standard boards to engineer-checked advanced builds
Ranked #5 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestNorth America
The home page separates three services. Turnkey PRO bundles fabrication, component procurement and assembly, Standard PCBs covers bare-board fabrication with optional procurement and assembly, and Advanced PCBs assigns a dedicated CAM engineer to complex technology.
The headquarters is given as Sunnyvale, CA 94086. Quotes vary by quantity and turn time and appear only after you enter details, so nothing is comparable at a glance.
What stands out
Turnkey PRO
US fabrication
CAM engineer
Where it costs you
Complex or advanced boards go to a custom quote, so no price can be seen up front.
The page lists no discount, trial or coupon for first-time buyers.
Right for
Teams that need fabrication, parts and assembly handled as a single order
Wrong for
Buyers comparing posted per-board prices across several vendors
United StatesInstant online quote by quantity and turn time; custom quote for advanced orders
Toronto-based board and assembly service with in-house parts procurement
Ranked #6 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestNorth America
The site pairs board orders with a BOM pricing tool and a free passive parts database, and says DFM and DFA verification is complimentary on each order. Prices are selectable in USD or CAD.
The Toronto facility houses the head office, parts procurement and an assembly line, while a Markham, ON address sits in the contact section. Because prices are not published, the discounts promised as automatic cannot be checked in advance.
What stands out
assembly focus
BOM pricing tool
Canadian head office
Where it costs you
No prices are published; the cost only appears through the online quote system.
The 'Cost-Free Products' section lists no details on the page we read.
Right for
Product teams that want sourcing and assembly handled alongside the boards
Wrong for
Buyers who need a board price before sharing a bill of materials
CanadaOnline quote with automatic discounts; prices in USD or CAD
Singapore-headquartered maker with factories in Thailand and China
Ranked #7 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestAsia-Pacific
Three quantity bands are shown: prototypes from 5 to 1,000 pieces, assembly from 1 to 10,000 and beyond, and fabrication from 1 to 1 million.
The company runs a factory in Samut Prakan, a US office in Katy and a factory in Hangzhou. A feedback promotion offers a $100 coupon to the customer whose suggestion is picked. The page does not name the currency used for quotes.
What stands out
Singapore head office
1 to 1 million pcs
extra gold charge
Where it costs you
No prices appear; every service routes through a Quote Now link.
PCBs with gold area above 15% carry an extra cost, per the page.
Right for
Buyers whose volumes could climb from a prototype to a million boards
Wrong for
Buyers who want to read a price before filling in a form
SingaporeQuoted per service through Quote Now links; no prices shown
Boards with plainly stated limits and an advertised design review
Ranked #8 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestElsewhere
The cost lines are PCB, PCBA, setup, materials, components, assembly, operation fee and stencil, which helps a buyer see where a total comes from.
Gerber uploads accept up to 50 MB as ZIP or RAR, and stencil files up to 4 MB. The company is named Seeed Technology Co.,Ltd. with no country given. At reading time the page said no coupons were available.
What stands out
stated limits
24-hour production
functional testing
Where it costs you
The calculator showed only placeholder values of USD$0.00 when we looked.
Certification and mechanical parts are priced by hand, so those costs stay hidden.
Right for
Makers who check design rules, trace width and drill size before ordering
Wrong for
Buyers needing certification work priced directly on the page
Not stated by the vendorUSD calculator built from PCB, assembly and stencil lines; no amounts shown
Five-piece prototype boards with a one-dollar first order for new users
Ranked #9 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestElsewhere
The listed sample configuration is FR-4, two layers, 100 x 100 mm, quantity 5, which is also the stated minimum. Coupons, a redemption centre and reward points are linked but show no amounts.
Stencils carry a discount price with a 4-7 working day turn. The copyright runs '2012 - 2026 ELECROW'. Offers appear aimed at new accounts, so returning buyers should expect the plain calculator price instead.
What stands out
$1 prototype
currency choice
medical project offer
Where it costs you
The sample price field was blank on the page at the time of reading.
The country is not stated; the only United States mention is a default shipping choice.
Right for
First-time buyers wanting a cheap trial board and a choice of three currencies
Wrong for
Buyers ordering fewer than five boards of a standard design
Not stated by the vendorCalculated online, USD by default with EUR and JPY selectable; sample price blank
Prototype boards from five pieces, with welcome coupons for new buyers
Ranked #10 of 11 in Best PCB Manufacturing Services in 2026.
Published pricingElsewhere
The home page claims 'Direct factory pricing', 24-hour prototype lead times and layer counts from 1 to 40, with a one-piece minimum on PCB and PCBA alike. Assembly is shown with no set-up fee and free stencils.
New-user welcome coupons are offered, and an anniversary sale is mentioned without detail. The company describes itself as a major enterprise in China but states no head office.
What stands out
24-hour prototypes
1 to 40 layers
welcome coupons
Where it costs you
The headline price is a 'from' figure; exact cost needs the instant calculator.
No headquarters address is stated, only a reference to China and a +86 number.
Right for
Buyers who want one-piece orders and up to 40 layers from one site
Wrong for
Buyers who need a postal address or registered seat before ordering
Not stated by the vendorPublished entry price for a five-piece prototype; instant calculator for exact amounts
Instant-quote board service with a five-piece minimum and no stated address
Ranked #11 of 11 in Best PCB Manufacturing Services in 2026.
Pricing on requestElsewhere
The quote page lists serial-number or 2D barcode marking at no service fee and a free random flying probe test. Extra charges apply to a full flying probe test, though no amount is shown, and to vias with a hole under 0.3 mm and diameter of 0.4 mm or less.
Shipping is worked out by destination. Prices carry a bare $ sign without naming the currency, and the about page offers no company address.
What stands out
instant quote
flying probe test
parts selection
Where it costs you
The calculator showed only a $0.00 placeholder, so a price needs a full specification.
The about page gives a founding year but no address, registered office or country.
Right for
Buyers who will enter a full specification and compare the resulting total
Wrong for
Buyers who must know the supplier's country before placing an order
Not stated by the vendorOnline calculator showing placeholder amounts until board details are entered
A PCB manufacturing service fabricates bare circuit boards from customer design files, often sources components and assembles them too, and charges per board, per area or per quoted order. The differences that matter are rarely in the feature list, so this is the order we would work through them.
01
Start with pricing transparency
Prices are public at 4 products (OSH Park, Multi-CB, Advanced Circuits, PCBGOGO) and on request at the remaining 7, so budget time for quotes if your favourite is in that second group.
02
Ask which country the contract runs through
Check the vendor's home market (Elsewhere 7, North America 3, Asia-Pacific 1), because that is where subpoenas and data requests arrive first, whatever region holds your files.
Reading a PCB quote before you upload a Gerber file
The calculator is where this market hides or shows its prices. Multi-CB prints a euro grid by layer count and turn time, and Advanced Circuits posts fixed per-board prices on its front page. Others show nothing until you key in a specification: Eurocircuits and Sierra Circuits calculate only after layers, size and quantity are entered, while PCB Cart and Bittele route you to a form.
JLCPCB and Seeed Fusion displayed placeholder zeros when we looked. Treat a headline such as PCBGOGO's five-piece 'from' price as a starting point, because exact cost comes from the calculator. Run the same board through two or three vendors and compare final totals, not entry prices, because shipping, testing and small-via surcharges can change the order of the list.
Enter identical layers, size and quantity at each vendor
Note whether the figure includes shipping or only the boards
Check which currency the page uses, since several show only a dollar sign
Minimum quantities and area pricing for small runs
How a vendor counts changes what a single design costs. OSH Park charges per square inch and requires three copies, so a tiny board is cheap and a large one is not. JLCPCB and Elecrow both set five pieces as the smallest standard quantity, which matters if you want two boards. Advanced Circuits lists no fabrication minimum, and PCBGOGO and Multi-CB allow single pieces.
PCB Cart's prototype band starts at five pieces but its fabrication band starts at one. Decide how many spares you really need, then check whether a larger quantity brings the per-board cost below what three or five pieces would cost. Multi-CB's series prices at 1,000 and 5,000 pieces show how steeply the unit price can fall.
Compare the stated minimum with the quantity you need
Work out cost per board, not per order
Check whether area pricing suits your board dimensions
Stated limits, extras and what a DFM check covers
Design rules decide whether a cheap board is buildable. Seeed Fusion publishes copper weight of 1 to 3 oz, a 0.2 mm minimum drill and 4/4 mil trace and spacing, which you can test against your layout. JLCPCB names extra charges for small vias and for a full flying probe test. PCB Cart notes a surcharge when gold area exceeds 15%.
Several vendors list a design review as free, including Advanced Circuits, PCB Cart, Bittele and Seeed Fusion, but the pages we read do not say what each review covers. A cheap board that breaks a limit is often rebuilt or repriced after payment. Read the limits page yourself, then run the review before ordering and keep its report.
Compare your trace, drill and via sizes with the stated limits
Look for named surcharges on vias, gold area or testing
Run the design review before you pay, not afterwards
Where the boards are made and what the site says about itself
Vendors differ in how much they tell you. Advanced Circuits calls itself American-based, Sierra Circuits gives a Sunnyvale address and US fabrication, and Eurocircuits says factories in Hungary and Germany. PCB Cart names a Singapore head office and Bittele one in Toronto. JLCPCB, PCBGOGO, Elecrow and Seeed Fusion state no country on the pages we read, and Multi-CB gives no registered seat.
That matters for customs, returns, tax on shipment and who answers a dispute. Ask for a company address and the production site before a first order, and check that the factory named on the quote matches the one on the invoice. A vendor that names no address is not necessarily a problem, but it leaves you with less to rely on if a batch arrives wrong.
Find the legal entity and address, not only a trading name
Ask where the boards will be made and shipped from
Check whether prices exclude VAT or import duty
What goes wrong most often when buying PCB manufacturing services software
Comparing entry prices instead of full totals with shipping, so a cheap headline board arrives with a larger bill.
Ordering five boards when two would do because the minimum quantity was never read.
Assuming a free design review guarantees the board will build, when none of the pages promise that.
Choosing a vendor without finding its legal entity, address or production country first.
07
Frequently asked questions
6 answers
What is the best PCB manufacturing services in 2026?
OSH Park leads our ranking of 11. OSH Park prices boards by area instead of by order, which rewards small designs. A 2-layer prototype is listed at $5 per square inch with at least three copies, and bulk orders get a 40% reduction on prototype and 4-layer boards.
The boards are made in the USA and shipped abroad. Flex was temporarily unavailable when we looked, and the site names no registered seat.
Which PCB manufacturing services tools publish their pricing?
4 of the 11, with the pricing model each one publishes:
OSH Park: Published per square inch by board type; minimum of three copies.
Multi-CB: Published in EUR excluding VAT, with shipping added per destination.
Advanced Circuits: Published per board by service type; no minimum for fabrication.
PCBGOGO: Published entry price for a five-piece prototype; instant calculator for exact amounts.
The remaining 7 sell by quote.
Is there a free PCB manufacturing services tool?
Not among the products reviewed here: no vendor on this list has a free tier worth using.
Where are these PCB manufacturing services vendors established?
The headquarters are spread over 4 countries and 3 regions, Elsewhere 7, North America 3, Asia-Pacific 1:
OSH Park: Not stated by the vendor.
Multi-CB: Not stated by the vendor.
Advanced Circuits: United States.
Eurocircuits: Not stated by the vendor.
Sierra Circuits: United States.
Bittele: Canada.
PCB Cart: Singapore.
Seeed Fusion: Not stated by the vendor.
Elecrow: Not stated by the vendor.
PCBGOGO: Not stated by the vendor.
JLCPCB: Not stated by the vendor.
What should you use instead of OSH Park?
Second is Multi-CB, which suits companies wanting transparent euro prices from one-off prototypes to series. Third is Advanced Circuits, which suits US-based engineers wanting a posted price per board before uploading anything.
Who should not buy OSH Park?
Buyers needing assembly or component sourcing from the same site. Flex boards were listed as temporarily unavailable at the time of reading..
Vendors who think their PCB manufacturing services product should be here can tell us about it: what it does, who it is for. The call is ours, and software advice sets out what being listed means.
