Opto 22 groov

Ranked #7 of 11 for SCADA software: Edge controller hardware with Linux, Ignition Edge and Node-RED on board.

On this site vendors can buy visibility, and we say so. Outbound links, including the one to Opto 22 groov, are marked identically. Read more.

Visit Opto 22 groov See it in the SCADA software ranking

01

At a glance

HeadquartersUnited States
Pricing modelHardware sold through distributors; no prices or trial on the product page
Best forSites wanting one rugged controller that collects field data and feeds a SCADA layer
DeploymentNothing recorded
APINot stated in the pages we read
Free planNo free plan recorded
02

What is Opto 22 groov?

Opto 22 groov EPIC is not a software package in the usual sense. The company describes it as an Edge Programmable Industrial Controller, and says plainly that it is not a PLC, PAC or PC. It is marketed for collecting, processing and sharing data at the network edge. Opto 22 is based in Temecula, California, according to the product page address.

Two processor models are listed: GRV-EPIC-PR1 with 2 GB of RAM and 6 GB of user space, and GRV-EPIC-PR2 with 3.75 GB of RAM and 22 GB of user space. Both use a quad-core ARM processor under a real-time, open-source Linux operating system. For SCADA work the controller is paired with Ignition Edge or full Ignition, or it publishes data over MQTT with a Sparkplug payload. Anyone shortlisting it should treat it as a hardware purchase with software on board.

03

Opto 22 groov key features

  • Edge controller, not a PLC. Opto 22 positions groov EPIC as a separate class of device from a PLC, PAC or PC. The aim is to gather and process plant data close to the source and share it onwards, rather than to replace a central control room.
  • Two processor options. The PR1 has 2 GB of RAM and 6 GB of user space, while the PR2 has 3.75 GB of RAM and 22 GB of user space. The pages read do not say which workloads need the larger model.
  • Four ways to program it. The product page lists PAC Control, CODESYS (IEC 61131-3), Node-RED and optional SSH access. Teams with existing IEC 61131-3 skills and teams used to flow-based tools therefore both have an entry point.
  • Ignition and MQTT connectivity. Connectivity runs through Ignition Edge or full Ignition, and through MQTT with a Sparkplug payload. Ignition Edge supplies OPC UA drivers for Allen-Bradley and Siemens PLC systems, so mixed shop floors can be read.
  • Dual Gigabit Ethernet. Two independent Gigabit Ethernet ports allow network segmentation, for instance keeping a control network apart from an IT network. An integral touchscreen handles local setup without a laptop, and HDMI and USB ports are present.
  • Built-in security features. The specs page names firewalls, encryption, LDAP user authentication, certificate management and a VPN client. A cybersecurity technical note, Form 2310, is linked for the detail behind those items.
  • Hardened physical design. The chassis is stainless steel, I/O modules are hot-swappable, field wiring uses spring clamps up to 14 AWG and the stated operating range is -20 to 70 degrees Celsius. Hazardous location approvals are listed too.
04

Who Opto 22 groov suits

  • Plant engineers adding edge data collection. A team that wants machine data pushed to a central historian or cloud broker can use the MQTT with Sparkplug route, without adding a separate gateway PC to the cabinet.
  • Integrators in hazardous areas. UL Hazardous Locations Class 1 Div 2 approval and ATEX compliance are listed on the product page, which matters for sites where ordinary industrial PCs cannot be installed.
  • Teams already running Ignition. Because Ignition Edge and full Ignition are named connection routes, groov EPIC can sit under an existing Ignition server as the field-side controller and data source.
05

Getting started with Opto 22 groov

The pages we read describe the product rather than a step-by-step setup procedure, so this is what can be said. The processor has an integral touchscreen so that local setup can be done without a PC. A groov EPIC Configurator is linked from the product page, although the page does not describe it as a trial or explain what it does in detail.

Free online groov EPIC training is offered through OptoU Online. For help from a person, Opto 22 lists phone support on 800-321-6786 in the US and Canada and +1-951-695-3000 worldwide, plus a Talk to an Engineer page. Programming starts from your choice of PAC Control, CODESYS, Node-RED or SSH. Buyers should plan to order through a distributor, since online ordering is limited to the USA and Canada.

06

The case for and against Opto 22 groov

Where Opto 22 groov earns its place
  • Opto 22 sells groov EPIC, an edge programmable industrial controller that it says is not a PLC, PAC or PC, so this entry is hardware plus software, not a software licence.
  • Marked in our records as hazardous-area rated.
  • Best for: Sites wanting one rugged controller that collects field data and feeds a SCADA layer.
  • Catalogue tag: Linux based.
  • Edge controller, one of the three traits the catalogue lists for Opto 22 groov.
Where Opto 22 groov does not
  • Less suited to: Buyers who only want software to install on their own server.
  • The product page lists no prices or trial, and online ordering covers the USA and Canada only.
  • Plant-wide SCADA screens come from Ignition or another package, not from the controller alone.
07

What we make of Opto 22 groov

Opto 22 sells groov EPIC, an edge programmable industrial controller that it says is not a PLC, PAC or PC, so this entry is hardware plus software, not a software licence.

It runs real-time open-source Linux and connects to Ignition Edge or full Ignition. The product page shows neither prices nor a trial. Ordering is through a local distributor, or online only for customers in the USA and Canada.

The SCADA software list places Opto 22 groov 7 of 11: Node-RED sits directly above it and Siemens WinCC directly below. Established names take the places after the first three, in ranked order, and we give no numeric score.

North America is home to 2 of the 11 vendors, Opto 22 groov among them (the United States).

08

Opto 22 groov pros and cons in practice

Works well
  • Four programming routes (PAC Control, CODESYS, Node-RED, SSH) let different skill sets work on the same controller.
  • Two independent Gigabit Ethernet ports support separating control and IT networks.
  • Hazardous location approvals (Class 1 Div 2, ATEX) are listed on the product page.
  • Free online training is offered through OptoU Online, and phone support is published with numbers.
Gets in the way
  • It is a hardware product, so it does not replace a SCADA software licence on its own; visualisation relies on Ignition or similar.
  • No prices are shown, and a quote depends on the distributor.
  • Online ordering covers the USA and Canada only.
  • The pages read do not say which workloads need the PR2 instead of the PR1.
09

Living with Opto 22 groov: setup and exit

The PR1 model has 2 GB of RAM and the PR2 has 3.75 GB.

Programming is by PAC Control, CODESYS or Node-RED, and MQTT with Sparkplug is listed.

Built-in security covers LDAP authentication and a VPN client, and the chassis operates from minus 20 to 70 degrees Celsius with Class 1 Division 2 and ATEX approvals.

10

Opto 22 groov pricing

In the catalogue: Hardware sold through distributors; no prices or trial on the product page.

The product page we read lists no prices and does not mention a trial. It does link a groov EPIC Configurator, which the page does not present as a trial or as a quote tool. Because the product is hardware, a purchase will normally consist of a processor plus I/O modules and a chassis, so a price needs a configured bill of materials rather than a per-user figure. Ordering is through a local distributor, or online for customers in the USA and Canada only. Customers elsewhere therefore deal with a distributor for quotes and delivery. The pages read do not describe software licence fees for Ignition, which is a separate product from a separate company and carries its own terms. Training is free through OptoU Online, according to the specs page.

Where this comes from: the vendor pages at opto22.com, checked for Best SCADA Software in 2026 on 15 November 2026.

11

Opto 22 groov: data and security

Opto 22 lists dual independent network interfaces, firewalls, encryption, LDAP user authentication, certificate management and a VPN client as built-in security features, and links a cybersecurity technical note, Form 2310, for detail. The processors run a real-time, open-source Linux operating system.

Data stays on the device unless you send it out, for example over MQTT with Sparkplug or through Ignition. The pages read name no security certifications, no hosting regions and no data retention terms, since this is on-premises hardware rather than a hosted service. The company address given on the product page is 43044 Business Park Drive, Temecula CA 92590, USA.

12

Integrations and ecosystem

Integrations the vendor names (10):

  • Ignition Edge
  • Ignition
  • MQTT
  • Sparkplug
  • OPC UA
  • Allen-Bradley PLCs
  • Siemens PLC systems
  • PAC Control
  • CODESYS
  • Node-RED
13

Opto 22 groov in numbers and labels

ProductOpto 22 groov
Vendor websiteopto22.com
Rank there#7 of 11
Catalogue tagsEdge controller, Linux based, Hazardous-area rated
HeadquartersUnited States (North America)
Price visibilityModel recorded, no figure
Gaps in our recordsfunding rounds and staff numbers
Alternatives pageNone yet
Head-to-head pagesNo comparison written
Primary guideBest SCADA Software in 2026
14

Close alternatives to Opto 22 groov

The choice below rests on shared catalogue tags, price model, free plan and region, with rank distance as the tie-break.

  • PcVue (#3 of 11): HMI and SCADA platform scaling from one station to hundreds. Watch out: no price, trial or free version is mentioned on the home page. (France)
  • VTScada (#5 of 11): Single-licence SCADA suite for laptops up to multi-million tag systems.
  • AVEVA System Platform (#9 of 11): A good match for: Multi-site operators standardising applications through reusable asset templates and one historian. (United Kingdom)
  • Schneider EcoStruxure Geo SCADA (#10 of 11): Telemetry SCADA for wide-area assets, formerly sold as ClearSCADA.
15

Where else Opto 22 groov is ranked

GuidePosition
Best SCADA Software in 2026#7 of 11
16

Questions about Opto 22 groov

9 answers
Is Opto 22 groov one of the top SCADA software?

Position 7 of 11 is where Opto 22 groov sits among SCADA software.

How much does Opto 22 groov cost?

Our catalogue records Opto 22 groov’s pricing as: Hardware sold through distributors; no prices or trial on the product page. On free access, no free tier or free plan is recorded.

Who is Opto 22 groov best for?

Sites wanting one rugged controller that collects field data and feeds a SCADA layer. It does not fit as well for buyers who only want software to install on their own server.

Which country is Opto 22 groov from?

Opto 22 groov is established in the United States, which our regional grouping counts as North America. That is where the contracting company sits, not necessarily where your data is hosted.

What else should I look at besides Opto 22 groov?

Start with PcVue, VTScada, AVEVA System Platform and Schneider EcoStruxure Geo SCADA. Each of them has its own entry in the same guide.

Is groov EPIC a SCADA package?

Opto 22 calls it an edge programmable industrial controller and says it is not a PLC, PAC or PC. SCADA functions come from pairing it with Ignition Edge or full Ignition, or from sending data over MQTT.

Which languages can it be programmed in?

The product page lists PAC Control, CODESYS (IEC 61131-3) and Node-RED, with optional SSH access to the Linux system.

Where is Opto 22 based?

The product page gives the address 43044 Business Park Drive, Temecula CA 92590, USA.

Can I buy it online?

Online ordering is for customers in the USA and Canada. Elsewhere the page points to a local distributor.

17

Opto 22 groov: sources

Read from the vendor’s own pages on 15 November 2026.

18

How we rank

We rank on what separates products after the demo: time to useful, the real price, the exit and who the product is for. Here that gives Opto 22 groov the #7 position in a list of 11. How vendor facts are sourced, and how money can and cannot influence a page, is in the editorial process.