OpenFOAM

Ranked #4 of 13 for engineering simulation software: Open source CFD toolbox from OpenCFD, released every six months.

Some vendors pay for placement on this site. This profile of OpenFOAM is written by us, and vendor links are marked alike: disclosure.

Visit OpenFOAM See it in the engineering simulation software ranking

01

Key facts about OpenFOAM

HeadquartersNot stated by the vendor
Free planNone recorded
APINot covered by the sources we used
Pricing modelOpen source download; support, code development and training courses listed without rates
Active since2004 (as stated in our review text)
Best forEngineers comfortable with solver toolboxes who want source access and a fixed release cycle
DeploymentOpen source code
02

What is OpenFOAM?

OpenFOAM is presented on openfoam.com as free, open source computational fluid dynamics software developed primarily by OpenCFD Ltd since 2004. Named application areas are fluid flows with chemical reactions, turbulence and heat transfer, and the page also lists acoustics, solid mechanics and electromagnetics. Releases are scheduled every six months, in June and December, and the latest listed is v2606, dated 26 June 2026.

Downloads cover Linux, macOS, Windows and source code. Around the free software, OpenCFD lists support, code development, engineering services and training courses, none with prices. The home page describes OpenCFD as an affiliate of Keysight, while one sentence calls it a wholly owned subsidiary, and it says the team is located in far-east Asia, India, Europe and North America.

03

OpenFOAM key features

  • Open source CFD toolbox. The home page calls the software open source and freely available, and links to a Licensing page. The home page itself does not state the licence terms, so anyone building a product on it should read that linked page.
  • Fixed release rhythm. Releases arrive every six months, in June and December. The latest on the home page is v2606 from 26 June 2026, which makes upgrade planning predictable for teams that pin a version per project.
  • Fluids with reactions, turbulence and heat transfer. The named focus is fluid flows with chemical reactions, turbulence and heat transfer. Acoustics, solid mechanics and electromagnetics appear in the same list, though the page gives no detail on how deep each area goes.
  • Downloads for three operating systems and source. Packages are offered for Linux, macOS and Windows, plus source. The pages we read do not describe installation steps or hardware requirements for any of them.
  • Support and code development services. OpenCFD lists support, code development, engineering services and training courses. A company without in-house CFD developers can buy help, but the rates are not on the home page.
  • Trademark and intellectual property position. The page says OpenCFD transferred the OpenFOAM intellectual property rights to the OpenFOAM Foundation, Inc. in 2011, and that OpenCFD now owns the OpenFOAM trademark. Readers meeting other OpenFOAM distributions should keep that history in mind.
  • Legal statement on free software. The legal page names OpenCFD Ltd, copyright 2026, and states that the company produces free open source software while keeping its rights over copyright material and trademarks.
04

Who OpenFOAM suits

  • A research group with programming skills. Open source code lets researchers read and extend solvers, and the six-month releases give a stable target for a thesis or project. Code development is a listed service if outside help is wanted.
  • A company wanting a CFD tool without licence fees. Downloading the software costs nothing according to the home page. Budget then shifts to engineer time, hardware and, if needed, the listed support or training, whose prices are not shown.
  • A consultancy needing outside CFD capacity. Engineering services are listed beside support and training. A firm without a CFD team could ask OpenCFD for a quote, with the caveat that the pages show no rates or turnaround times.
05

Getting started with OpenFOAM

The home page offers downloads for Linux, macOS, Windows and source, so the first step is choosing a package for your operating system. The latest release shown is v2606, dated 26 June 2026. The home page does not describe an installation guide, tutorials or example cases, and the pages we read name no minimum hardware.

Training courses are listed as a service without prices. Because the home page does not state the licence terms and only links to a Licensing page, check that page before using the software in a product or distributing a modified version. Support is a paid service listed on the same page.

06

Strengths and limits of OpenFOAM

What OpenFOAM does well
  • OpenFOAM is presented as free, open source CFD software developed mainly by OpenCFD Ltd, which the page calls an affiliate of Keysight and, in another sentence, a wholly owned subsidiary.
  • Strongest for: Engineers comfortable with solver toolboxes who want source access and a fixed release cycle.
  • Marked in our records as three operating systems.
  • Marked in our records as six-month releases.
  • Open source is among the traits we single out for it.
What to weigh against OpenFOAM
  • Support, engineering services and training carry no prices, so the cost of outside help is unknown until someone asks.
  • Look elsewhere if you are Buyers expecting a vendor-supported graphical product with listed prices.
  • Licence terms are left to a separate Licensing page that the home page links.
07

What we make of OpenFOAM

OpenFOAM is presented as free, open source CFD software developed mainly by OpenCFD Ltd, which the page calls an affiliate of Keysight and, in another sentence, a wholly owned subsidiary.

Releases arrive each June and December, the latest listed being v2606. Downloads cover Linux, macOS, Windows and source. Support, engineering services and training are offered without prices, and the home page itself does not state the licence terms.

OpenFOAM is entry #4 of 13 in the engineering simulation software list: SimScale sits directly above it and LISA FEA directly below. Challengers hold places 1 to 3 where a category has them; the number here is a place in the order, not a mark out of ten.

The vendor states no country of establishment, so OpenFOAM is left out of the regional count for this list.

08

OpenFOAM pros and cons in practice

Works well
  • The software is presented as free and open source, with downloads for three operating systems.
  • Releases follow a clear June and December schedule.
  • Application areas go beyond fluids to acoustics, solid mechanics and electromagnetics.
  • Support, code development and training are available from the developing company.
Gets in the way
  • The home page does not state the licence terms and points to a separate Licensing page.
  • Support, services and training are listed without prices.
  • Ownership wording is inconsistent: affiliate of Keysight in one place, wholly owned subsidiary in another.
  • No registered address or country of registration is given for OpenCFD Ltd.
09

OpenFOAM pricing

In the catalogue: Open source download; support, code development and training courses listed without rates.

The software itself is presented as free and open source. The home page lists support, code development, engineering services and training courses, and shows no prices or currency for any of them. We saw no subscription tiers, seat counts or published rate cards on the pages we read, so the cost of services arrives only through contact with OpenCFD. The legal page states that OpenCFD Ltd produces free open source software and keeps its legal rights over copyright material and trademarks. Total cost of ownership therefore depends on in-house effort, hardware and any services bought. A team comparing it with a licensed package should price engineer time as well as the software.

Basis: openfoam.com, read for the Best Engineering Simulation Software in 2026 guide (reviewed 18 November 2026).

10

Setup, support and exit with OpenFOAM

OpenCFD Ltd has developed OpenFOAM since 2004.

Named application areas include fluid flows with chemical reactions, turbulence and heat transfer, plus acoustics, solid mechanics and electromagnetics.

The page says OpenCFD transferred the intellectual property rights to the OpenFOAM Foundation, Inc.

in 2011 and now owns the trademark.

Its team is spread across far-east Asia, India, Europe and North America, and no country of registration is given.

The legal page shows no legal form or registered address.

11

OpenFOAM: data and security

OpenFOAM is software that users install and run on their own machines, so models and results stay under their control unless they choose to share them. The pages we read describe no hosted service, certifications or data-processing terms.

On ownership, the home page describes OpenCFD as an affiliate of Keysight, and one sentence calls it a wholly owned subsidiary. It says the team is located in far-east Asia, India, Europe and North America and gives no country of registration. The legal page names OpenCFD Ltd, copyright 2026, with no legal form or registered address.

12

Fact sheet: OpenFOAM

ProductOpenFOAM
Vendor websiteopenfoam.com
Catalogue tagsOpen source, Six-month releases, Three operating systems
Head-to-head pagesNo comparison written
Primary guideBest Engineering Simulation Software in 2026
What we do not holdheadcount, funding and customer count
Alternatives pageNone yet
Price visibilityModel recorded, no figure
Source codeOpen source, per our records
HeadquartersNot stated by the vendor
Rank there#4 of 13
13

Integrations and ecosystem

Integrations the vendor names (6):

  • Linux
  • macOS
  • Windows
  • Source code
  • OpenFOAM Foundation, Inc.
  • Keysight
14

Also ranked in

15

Close alternatives to OpenFOAM

These are the nearest neighbours of OpenFOAM in the same list, picked on shared traits and price model.

  • Mecway (#1 of 13): Windows finite element package sold as a one-time perpetual licence.
  • SimFlow CFD (#2 of 13): Desktop CFD from meshing to post-processing with published yearly licences. Watch out: the entry plan allows one CPU and 200,000 mesh nodes, so industrial cases move to a plan costing EUR 8,000 a year or more.
  • SimScale (#3 of 13): Browser-based simulation with a Community plan and core-hour tiers. Watch out: community stops at 10 simulations, one user and 16 cores, and the paid plans show no price at all.
  • LISA FEA (#5 of 13): Not for: teams solving large assemblies or needing a verifiable company location. Compact Windows finite element tool with a node-limited free version.
  • ANSYS (#13 of 13): Broad simulation portfolio now presented as part of Synopsys. Best for: Large engineering organisations needing several physics solvers under one vendor contract.
16

OpenFOAM: questions

9 answers
Is OpenFOAM free, or what does it charge?

Our catalogue records OpenFOAM’s pricing as: Open source download; support, code development and training courses listed without rates. On free access, we found no free tier.

Is OpenFOAM a European company?

The vendor pages we reviewed state no country of establishment for OpenFOAM, so we do not give one.

Is OpenFOAM one of the top engineering simulation software?

In our engineering simulation software list OpenFOAM stands at place 4 of 13.

What are the main alternatives to OpenFOAM?

Start with Mecway, SimFlow CFD, SimScale, LISA FEA and ANSYS. Each of them has its own entry in the same guide.

Who is OpenFOAM best for?

Engineers comfortable with solver toolboxes who want source access and a fixed release cycle. Less suited to: buyers expecting a vendor-supported graphical product with listed prices.

How often is OpenFOAM released?

The home page says releases are scheduled every six months, in June and December. The latest listed is v2606, dated 26 June 2026.

Who develops it?

The home page says OpenCFD Ltd has developed it primarily since 2004, and describes OpenCFD as an affiliate of Keysight. One sentence calls it a wholly owned subsidiary.

Which operating systems are supported?

Downloads are offered for Linux, macOS and Windows, as well as source code.

Does OpenCFD sell anything around the software?

Yes. Support, code development, engineering services and training courses are listed on the home page, without prices.

17

OpenFOAM: sources

Read from the vendor’s own pages on 18 November 2026.

  • openfoam.com: free open source CFD since 2004, application areas, release schedule and v2606, downloads, services, Keysight affiliate wording, team locations, IP transfer to OpenFOAM Foundation, Inc. in 2011
  • openfoam.com/legal: OpenCFD Ltd, copyright 2026, free open source software statement, no legal form or address
  • openfoam.com: link to a Licensing page while the home page itself states no licence terms
  • openfoam.com: support, code development, engineering services and training courses listed without prices
18

How we rank

The same four questions are asked of every engineering simulation software product: time to value, real cost, the way out and the intended buyer. On those tests OpenFOAM lands at place 4 of 13. The editorial process sets out how facts are gathered and how commercial links are handled.