Flow Science

FLOW-3D solver for liquid surfaces, from a Santa Fe company founded 1980. In our guide to engineering simulation software it is ranked #7 of 13.

Vendors can pay for more visibility on this site; the link to Flow Science is marked like every other vendor link. How that works.

Visit Flow Science See it in the engineering simulation software ranking

01

At a glance

HeadquartersUnited States
Free planNo
Active since1980 (as stated in our review text)
Best forCasting, hydraulic, additive and welding teams modelling liquid surfaces and phase change
Pricing modelQuoted per organisation through sales or a distributor; no trial terms on the pages read
APINot stated in the pages we read
DeploymentNothing recorded
02

What is Flow Science?

Flow Science, Inc. makes FLOW-3D, a general-purpose solver for free surface flow, phase change, cavitation, fluid-structure interaction and complex fluid rheology. The about page says the company was founded in 1980 by Dr C. W. (Tony) Hirt, a pioneer of the volume-of-fluid method, and is headquartered in Santa Fe, New Mexico, with an East Coast office in Chapel Hill, North Carolina, opened in 2024.

FLOW-3D is described as a family of multiphysics products with industry variants named CAST, HYDRO, AM and WELD. The home page describes TruVOF as a registered trademark used in the solver's interface tracking. It states no prices and offers three routes: Contact Sales, Request a Personalised Demo and Find a Distributor.

03

Flow Science key features

  • Free surface flow. Free surface flow is the first capability named on the home page, tied to the volume-of-fluid heritage of the founder. The pages do not explain how results compare with other solvers.
  • Phase change and cavitation. Phase change and cavitation are listed beside free surface flow. Teams working on pumps, valves or casting, where liquid changes state or forms vapour, would look at these first.
  • Fluid-structure interaction. The home page lists fluid-structure interaction as a capability. No detail is given on the structural methods or on how motion of solid parts is coupled to the flow.
  • Complex fluid rheology. Complex fluid rheology is named, covering fluids whose viscosity does not stay constant. The pages we read give no list of supported material models.
  • Industry variants. The about page names CAST, HYDRO, AM and WELD variants within the FLOW-3D family. The names suggest casting, hydraulics, additive manufacturing and welding, but the pages we read do not spell this out.
  • TruVOF interface tracking. TruVOF is described as a registered trademark used in the solver's interface tracking. The page gives no technical description of what distinguishes it from other volume-of-fluid methods.
  • Distributor network. Visitors can use Find a Distributor, so local resellers apparently exist. The pages do not list distributors or countries, and say nothing on whether licences differ by channel.
04

Who Flow Science suits

  • A foundry or casting engineer. CAST is a named variant, and free surface flow with phase change is relevant to filling and solidification. The pages give no case studies, so fit has to be confirmed in a demo.
  • A hydraulics or water-systems specialist. HYDRO is a named variant, and free surface flow and cavitation are listed capabilities. Anyone modelling open-channel or dam flows would ask for examples during the personalised demo.
  • An additive manufacturing or welding group. AM and WELD are named variants of the family. Both involve moving liquid surfaces, though the pages give no detail on thermal or metallurgical models, so buyers should ask directly.
05

Getting started with Flow Science

The home page lists three actions: Contact Sales, Request a Personalised Demo and Find a Distributor. Neither the home page nor the about page we read describes a trial, and no installation guide, tutorial or system requirements appear.

The contact page says inquiries are answered within business hours, Monday to Friday, 8:00 am to 5:00 pm Mountain Time, which matters for buyers in European or Asian time zones. The practical route is therefore a demo, followed by a quote through sales or a distributor. Integrations such as CAD links are not listed, so these should be raised during that first conversation.

06

The case for and against Flow Science

Where Flow Science earns its place
  • Flow Science, Inc., founded in 1980 by volume-of-fluid pioneer Dr C.
  • Marked in our records as distributor network.
  • Where it fits: Casting, hydraulic, additive and welding teams modelling liquid surfaces and phase change.
  • Industry variants is among the traits we single out for it.
  • Flow Science is tagged Volume-of-fluid in our records.
Where Flow Science does not
  • Inquiries are answered Monday to Friday, 8:00 am to 5:00 pm Mountain Time, a narrow window for buyers in Europe or Asia.
  • Less suited to: Buyers wanting structural-only analysis or a price list before calling.
  • The pages read list no prices and no trial, so evaluation starts with a sales contact or a distributor.
07

Our verdict on Flow Science

Flow Science, Inc., founded in 1980 by volume-of-fluid pioneer Dr C. W. Hirt and based in Santa Fe, New Mexico, makes FLOW-3D, a multiphysics family with CAST, HYDRO, AM and WELD variants.

No prices appear; the visitor can contact sales, book a personalised demo or find a distributor. No trial is named. Integrations are not listed either, so CAD links and licence terms have to be asked about directly.

The engineering simulation software list places Flow Science 7 of 13: it follows Quanscient and comes before nTop. Challengers hold places 1 to 3 where a category has them; the number here is a place in the order, not a mark out of ten.

By headquarters, 2 of the 13 are established in North America, as Flow Science is in the United States.

08

Flow Science pros and cons in practice

Works well
  • Company history is stated: founded in 1980 by a volume-of-fluid pioneer, based in Santa Fe.
  • Capabilities named include free surface flow, phase change, cavitation and fluid-structure interaction.
  • Four industry variants give a route to a more specialised package.
  • A distributor network offers a local route to buy.
Gets in the way
  • No prices appear, so budget is unknown until sales or a distributor quotes.
  • The pages read name no trial, so evaluation depends on a personalised demo.
  • Integrations are not listed, so CAD links and licence terms have to be asked about directly.
  • Inquiries are answered Monday to Friday, 8:00 am to 5:00 pm Mountain Time.
09

Flow Science pricing

Charging model: Quoted per organisation through sales or a distributor; no trial terms on the pages read.

The home page states no prices and lists Contact Sales, Request a Personalised Demo and Find a Distributor. No currency, licence type, seat model or term appears on the pages we read, and the home page and about page name no trial. Cost is learned by asking the company or a distributor, which can mean different channels and different quotes in different regions. A buyer should ask which variant is needed, whether licences are perpetual or annual, how parallel cores are counted and what support and maintenance cost. The pages we read give no answers to those questions. Because FLOW-3D is a family of products with CAST, HYDRO, AM and WELD variants, the scope of a quote may depend on which one is chosen.

We took this from flow3d.com, the vendor’s own site, when we reviewed Best Engineering Simulation Software in 2026; that review is dated 18 November 2026.

10

Living with Flow Science: setup and exit

TruVOF is a registered trademark used for tracking the interface.

Industry variants are named CAST, HYDRO, AM and WELD.

A second office in Chapel Hill, North Carolina opened in 2024, and Flow Science, Inc.

is named as the company behind the FLOW-3D trademarks.

Buyers can ask for a distributor or a personalised demo.

11

Flow Science: data and security

The pages we read do not describe where FLOW-3D runs, whether as desktop software, on a cluster or in a hosted service, and they give no information on data handling. The contact page states that Flow Science, Inc. is the company behind the FLOW-3D trademarks in the USA and other countries.

The about page places the headquarters in Santa Fe, New Mexico, with an East Coast office in Chapel Hill, North Carolina. Certifications, export-control statements and data-processing terms are not described on the pages we read.

12

Flow Science integrations and ecosystem

Integrations the vendor names (6):

  • FLOW-3D CAST
  • FLOW-3D HYDRO
  • FLOW-3D AM
  • FLOW-3D WELD
  • TruVOF
  • Distributor network
13

Flow Science fact sheet

ProductFlow Science
Vendor websiteflow3d.com
Head-to-head pagesNot paired so far
Alternatives pageNo dedicated page
Gaps in our recordsuptime history and customer numbers
HeadquartersUnited States (North America)
Rank there#7 of 13
Primary guideBest Engineering Simulation Software in 2026
Price visibilityOn request
Catalogue tagsVolume-of-fluid, Industry variants, Distributor network
14

Where else Flow Science is ranked

15

Close alternatives to Flow Science

Closest by traits, not by rank: 3 products from the same list that overlap most with Flow Science.

  • nTop (#8 of 13): Suits: Engineering groups exploring many design variants before choosing which to simulate. (United States)
  • Rescale (#10 of 13): Not for: users who want one modelling application with a price list. Elastic cloud HPC platform hosting 1,250 or more engineering software packages.
  • ANSYS (#13 of 13): Not for: small teams wanting a single solver at a listed price. Broad simulation portfolio now presented as part of Synopsys.
16

Questions about Flow Science

9 answers
How much does Flow Science cost?

Quoted per organisation through sales or a distributor; no trial terms on the pages read is how we record the pricing of Flow Science. On free access, nothing is free to use, as far as we recorded.

Is Flow Science the right fit for me?

Casting, hydraulic, additive and welding teams modelling liquid surfaces and phase change. It does not fit as well for buyers wanting structural-only analysis or a price list before calling.

Where is Flow Science based?

The vendor is based in the United States (North America). That is where the contracting company sits, not necessarily where your data is hosted.

Is Flow Science one of the top engineering simulation software?

Flow Science is #7 of 13 in our engineering simulation software ranking.

Which tools compete with Flow Science?

Start with nTop, Rescale and ANSYS. Compare their entries before settling on Flow Science.

Who makes FLOW-3D?

Flow Science, Inc., founded in 1980 by Dr C. W. (Tony) Hirt and headquartered in Santa Fe, New Mexico, according to the about page.

What are the industry variants?

The about page names CAST, HYDRO, AM and WELD as variants within the FLOW-3D family of multiphysics products.

How do I get a price?

The home page shows no prices. It offers Contact Sales, Request a Personalised Demo and Find a Distributor.

When are inquiries answered?

The contact page says within business hours, Monday to Friday, 8:00 am to 5:00 pm Mountain Time.

17

Flow Science: sources

Read from the vendor’s own pages on 18 November 2026.

  • flow3d.com/about-us: founded 1980 by Dr C. W. (Tony) Hirt, Santa Fe headquarters, Chapel Hill office opened 2024, CAST, HYDRO, AM and WELD variants
  • flow3d.com: general-purpose solver capabilities, TruVOF, Contact Sales, personalised demo, Find a Distributor, no prices, no trial named
  • flow3d.com/contact-us: Flow Science, Inc. trademarks, inquiries Monday to Friday 8:00 am to 5:00 pm Mountain Time
  • flow3d.com: home page and about page state no trial and no prices
18

How we rank

We rank on what separates products after the demo: time to useful, the real price, the exit and who the product is for. That puts Flow Science at #7 of 13. Read the editorial process for the method and where paid visibility fits in.