Batfish

Open source analyser that finds errors in planned or current network configurations. Our network configuration management software ranking puts Batfish at #5 of 14.

On this site vendors can buy visibility, and we say so. Outbound links, including the one to Batfish, are marked identically. Read more.

Visit Batfish See it in the network configuration management software ranking

01

At a glance

HeadquartersNot stated by the vendor
APINot covered by the sources we used
DeploymentOpen source code
Pricing modelFree under the Apache-2.0 licence; run from an allinone Docker container or through the Pybatfish SDK
Best forEngineers who validate planned changes in pipelines with Python and Ansible beforehand
Free planYes, per our records
02

What is Batfish?

Batfish is an open source network configuration analysis tool. The home page says it finds errors and aims to guarantee the correctness of planned or current network configurations. It was first developed by researchers at Microsoft Research, UCLA and USC, later enhanced by Intentionet, and is managed by AWS as an open source project since the Intentionet team joined AWS. The source code is licensed under Apache-2.0 on GitHub.

The README describes an allinone Docker container that includes Batfish and example Jupyter notebooks, and the Python 3 SDK Pybatfish interacts with the Batfish service. Configuration support covers devices including A10, Arista, AWS, Azure, Cisco, Check Point, Juniper, Nokia, Palo Alto Networks and SONiC. The pages we read describe analysis only, and the site does not state the country of the maintaining organisation.

03

Batfish key features

  • Pre-change analysis. Analyses planned or current configurations and answers questions about them, so an error can be found before a change reaches a device.
  • Routing and session questions. The documentation covers analysis questions for routing protocol sessions, which lets a team test whether neighbours would establish as intended.
  • ACL and firewall analysis. Questions cover ACLs and firewall rules, with tutorials on the same topic, for checking what traffic a rule set would permit or block.
  • Differential analysis. The documentation lists differential analysis, so two versions of a configuration set can be compared for their effect on behaviour.
  • IPsec and VXLAN/EVPN. The documentation names IPsec tunnels and VXLAN/EVPN among its question areas, extending checks beyond basic routing.
  • Settings validation. Tutorials show validation of NTP, TACACS, AAA and SNMP settings, plus traceroute and reachability queries and failure-impact testing.
  • Pybatfish SDK. A Python 3 SDK installed with pip, used to interact with the Batfish service from scripts and notebooks.
04

Who Batfish suits

  • Teams reviewing changes before rollout. An engineer can load planned configurations and ask reachability or ACL questions before anyone touches a production device.
  • Network groups with CI pipelines. The site names GitLab CI/CD pipelines, Ansible modules, Netbox and Robot Framework, so checks can run as an automated step on each proposed change.
  • Engineers learning network verification. The allinone Docker container ships with example Jupyter notebooks, and tutorials cover basics, ACLs, forwarding, failure impact and routing.
05

Getting started with Batfish

The README describes an allinone Docker container that includes Batfish and example Jupyter notebooks, which is the quickest route to a working setup. The Python 3 SDK Pybatfish is installed with pip and talks to the Batfish service. Tutorial topics on the site cover basics, ACLs and firewalls, forwarding, failure impact and routing.

Questions and feature requests go to a Slack workspace or to GitHub. The pages we read describe analysis of configurations and mention no device backup or push functions, so a team normally pairs it with whatever collects and stores its configuration files. The documentation lives at batfish.readthedocs.io.

06

What we make of Batfish

Batfish analyses configurations and answers questions about them; the pages read describe no device backup or push functions, so it sits beside a backup tool.

The source is Apache-2.0 open source, first developed at Microsoft Research, UCLA and USC, enhanced by Intentionet and managed by AWS as an open source project since that team joined AWS. Support goes through Slack or GitHub, and no country is named.

In our network configuration management software ranking Batfish stands at #5 of 14: it follows Gluware and comes before Itential. No numeric score is attached; established products follow the challengers in their ranked order.

The vendor states no country of establishment, so Batfish is left out of the regional count for this list.

07

Strengths and limits of Batfish

Where Batfish wins
  • Where it fits: Engineers who validate planned changes in pipelines with Python and Ansible beforehand.
  • Marked in our records as pybatfish SDK.
  • Catalogue tag: Apache-2.0.
  • Catalogue tag: Pre-change analysis.
What to weigh against Batfish
  • The site names no country for the maintaining organisation and no support route beyond Slack and GitHub.
  • Batfish analyses configurations and answers questions about them; the pages read describe no device backup or push functions, so it sits beside a backup tool.
  • Less suited to: Teams wanting scheduled device backups and a web console.
  • Support is described as limited for Aruba, Dell Force10 and Foundry devices.
08

Batfish pros and cons in practice

Works well
  • Apache-2.0 licensing and the public GitHub source let a team inspect the analyser.
  • Questions can run before a change, which moves error finding earlier than deployment.
  • Named integrations include Ansible, GitLab CI/CD, Netbox and Robot Framework.
  • The allinone container includes example notebooks for a fast first test.
Gets in the way
  • The pages describe analysis only, with no device backup or push functions.
  • Support goes through Slack or GitHub, and the pages show no paid support option.
  • Configuration support is limited for Aruba, Dell Force10 and Foundry, according to the README.
  • The site does not state the country of the maintaining organisation.
09

Setup, support and exit with Batfish

Documentation covers questions on routing protocol sessions, ACLs and firewall rules, IPsec tunnels, VXLAN/EVPN and differential analysis.

Tutorials check NTP, TACACS, AAA and SNMP settings, run traceroute and reachability queries and test failure impact.

Configuration support spans A10, Arista, AWS, Azure, Cisco, Check Point, Juniper, Nokia, Palo Alto Networks and SONiC.

The README describes an allinone Docker container with Jupyter notebooks, and the site names integrations with Ansible, GitLab pipelines, NetBox and Robot Framework.

10

Batfish pricing

In the catalogue: Free under the Apache-2.0 licence; run from an allinone Docker container or through the Pybatfish SDK.

Batfish is released under the Apache-2.0 licence, as shown on the GitHub repository, and the pages we read list no prices, plans or paid tiers. It runs from the allinone Docker container or through the Pybatfish SDK. The cost to a team is the infrastructure that runs the container and the engineering time to write questions and integrate them with its pipeline. The site names support through a Slack workspace or GitHub, and shows no paid support contract or service level. The project is managed by AWS as an open source project, which the site states, though the pages describe no commercial offer built on it.

We took this from batfish.org, the vendor’s own site, when we reviewed Best Network Configuration Management Software in 2026; that review is dated 15 November 2026.

11

Batfish: data and security

Batfish is run by the user, so configuration files stay wherever the team runs the Docker container or service. The pages we read state no certification, encryption, hosting region or retention rules, and the site and documentation do not state the country where the maintaining organisation is based.

The Apache-2.0 source on GitHub can be inspected by anyone who wants to check what the analyser does with the files it loads. Configurations often hold credentials and addresses, so teams usually decide where the service runs and who can reach it.

12

Integrations and ecosystem

Integrations the vendor names (9):

  • Ansible (Batfish modules)
  • GitLab CI/CD pipelines
  • Netbox
  • Robot Framework
  • Pybatfish
  • Jupyter notebooks
  • Docker
  • Slack
  • GitHub

Also in our records:

  • The README describes an allinone Docker container with Jupyter notebooks, and the site names integrations with Ansible, GitLab pipelines, NetBox and Robot Framework.
  • The site names no country for the maintaining organisation and no support route beyond Slack and GitHub.
  • Catalogue tags that point to the ecosystem: Pybatfish SDK.
13

Batfish fact sheet

ProductBatfish
Vendor websitebatfish.org
Primary guideBest Network Configuration Management Software in 2026
Alternatives pageNone yet
Head-to-head pagesNone yet
Not in our datacompany size and funding
Source codeOpen source, per our records
Catalogue tagsApache-2.0, Pre-change analysis, Pybatfish SDK
HeadquartersNot stated by the vendor
Rank there#5 of 14
Price visibilityPublic on the vendor site
14

Close alternatives to Batfish

These are the nearest neighbours of Batfish in the same list, picked on shared traits and price model.

  • rConfig (#1 of 14): Config backup and rollback with an open source core and listed prices.
  • Itential (#6 of 14): Workflow and agent platform for infrastructure operations, bought by tier and term. Watch out: extra agent runs are not sold separately, so exceeding a tier means moving up to the next one.
  • Paessler Network Config (#7 of 14): Aimed at: PRTG users who add configuration history and change alerts to existing monitoring.
15

Also ranked in

16

Questions about Batfish

9 answers
Where is Batfish based?

The vendor pages we reviewed state no country of establishment for Batfish, so we do not give one.

Is Batfish the right fit for me?

Engineers who validate planned changes in pipelines with Python and Ansible beforehand. It does not fit as well for teams wanting scheduled device backups and a web console.

What does Batfish cost?

The pricing entry for Batfish reads: Free under the Apache-2.0 licence; run from an allinone Docker container or through the Pybatfish SDK. On free access, something can be used at no cost.

Where does Batfish stand among network configuration management software?

Position 5 of 14 is where Batfish sits among network configuration management software.

Which tools compete with Batfish?

The closest products in the same guide are rConfig, Itential and Paessler Network Config. They are ranked and described in the same list.

Does Batfish back up device configurations?

The pages we read describe analysis of configurations and mention no backup or push functions, so it sits beside a backup tool.

What licence does it use?

The source code is under the Apache-2.0 licence, as shown on the GitHub repository.

Who maintains it?

It was first developed at Microsoft Research, UCLA and USC, later enhanced by Intentionet, and is managed by AWS as an open source project.

How do I try it?

Use the allinone Docker container from the README, or install the Pybatfish SDK with pip and connect to the Batfish service.

17

Batfish: sources

Read from the vendor’s own pages on 15 November 2026.

18

How we rank

The same four questions are asked of every network configuration management software product: time to value, real cost, the way out and the intended buyer. On those tests Batfish lands at place 5 of 14. Method and commercial relationships are in our editorial process.